MM1018 The liquid shim!
MM1018 from DIAMANT Polymer is 100% friction-locking and flowable before curing: it adapts to the gap and fills it completely without any air pockets. MM1018 is dimensionally stable and closes the gap reliably and permanently.
The product enables the transfer of shear forces via the connecting joint. Mechanical or complex processing on site is not necessary. With tested strength values of up to 160 N/mm^2 (23.20b psi), we offer one of the strongest systems on the market.
MM1018 is an approved construction product and may be used explicitly for prestressed connections. The liquid Lining Sheet® adheres reliably to the substrate and prevents moisture from penetrating into the gap. Crevice corrosion therefore has no chance. MM1018 can be applied as a paste version or injected or poured as a liquid version.
Your advantages
✔ 100% force-fitting
✔ Flowable before curing
✔ Without mechanical processing
✔ Pasty or liquid version available
✔ Non-conductive/electrically insulating
✔ Good adhesion, high coefficient of friction
✔ High compressive strength
✔ Fatigue resistance like steel
✔ No volatile components
✔ Extremely low material shrinkage
✔ < 13% loss of preload force after 50 years
✔ Curing for 24 hours, re-tightening after 7 days
✔ Reliable corrosion protection.
Diamant Polymers, Inc.
World Wide Leader in Penetrants and Coatings
3495 Mustafa Dr
Cincinnati, Oh 45241
Office Phone 513-979-4011
customerservice@DiamantPolymersinc.com
imprint
Diamant Polymers, Inc.
World Wide Leader in Penetrants and Coatings
3495 Mustafa Dr
Cincinnati, Oh 45241
Office Phone 513-979-4011
customerservice@DiamantPolymersinc.com
imprint